Post-construction cleaning for a villa in Mallorca: getting the house ready to live in after renovation
What after-builders cleaning covers for a luxury villa in Mallorca, the right sequence, which materials are most easily damaged and how to budget for it.
When a renovation or new build is finished, the villa is not ready to move into, even if the builder has handed over the keys. Fine plaster, cement and sanding dust settles on floors, inside wardrobes, in air-conditioning ducts and on joinery; mortar, silicone, paint and labels are left on glass and sanitaryware; and a film of lime and grout residue covers stone, porcelain tiles and microcement. Post-construction cleaning is a different service from deep cleaning or routine housekeeping: it requires specific techniques, products and equipment, and doing it badly can permanently scratch or stain materials that cost a great deal of money. In Mallorca, where winter is the natural building season so that houses are ready by spring, November to March is when most of this work happens.
The sequence matters as much as the product. First, rubble and bulky waste are removed and all dust is vacuumed dry with HEPA-filter machines, starting with ceilings, light fittings, grilles and the inside of wardrobes and dressing rooms, because construction dust is so fine that sweeping or wiping with a damp cloth only spreads it. Next, stuck-on residue such as paint, silicone, mortar and protective film adhesive is removed with scrapers and products suited to each surface. Only then comes wet cleaning of floors, bathrooms and kitchen, and finally glass, frames and sliding door tracks, which collect sand and debris and should be checked before the rollers are damaged. A good team also cleans air-conditioning filters and ventilation grilles: if the system is switched on with construction dust inside, it will spread it through the whole house for weeks.
Premium materials are where the difference between a specialist company and a generic clean really shows. Marble and Mallorcan natural stone do not tolerate the acids typically used to remove cement residue, and an acid mark on a mares stone or marble floor cannot be cleaned away: it has to be polished out. Microcement and timber need neutral products and very little water; stainless steel and powder-coated aluminium scratch with abrasive pads; and large glass panels are damaged if they are scraped dry with sand still on them. That is why the company should visit the site before quoting, identify each material and, where in doubt, test in a discreet area. It is also a good moment to check the pool and outdoor areas: construction dust ends up in the water and filters and may require a shock clean of the filtration system.
On cost, post-construction cleaning is quoted by team hours and the real condition of the property rather than a fixed rate per square metre: a 400 m² villa after a full renovation may need a team of several people for two to four days, whereas a partial renovation takes far less. Ask for an itemised quote (interior, exterior, glass, pool and stone treatment where relevant), check that the company carries liability insurance and that its staff are properly registered, and agree the date with the builder so that no trades are still working after the clean. Ideally, link the post-construction clean to the villa ongoing maintenance: the same team then knows the newly finished house and can hold the standard from day one.
Tell us what you need and get your quote within 24 hours.
Get a free quote